Johnson Controls T-5210-1009, Pneumatic Signal Transmitter, DA, 0 to 100F

Description

Johnson Controls T-5210-1009, Pneumatic Signal Transmitter, DA, 0 to 100F-18 to 38C. New-Surplus, Never Used. Not in original package. Copper has some patina as seen in pictures.
Johnson Controls pneumatic signal transmitter with a temperature range of 0-100°F, a remote 8' copper averaging element. This transmitter measures temperature and converts the measurement to an air pressure signal that is transmitted to a control. This transmitter features ball type control port for increased accuracy, a lever with reinforced edges for increased linearity, a bimetal element to compensate for ambient temperature effect, and an integral hypodermic needle test point. T-5210 pneumatic temperature transmitters are designed to measure a temperature and convert this measurement to an air pressure signal that is transmitted to a pneumatic receiver, controller, or receiver-indicator. Pneumatic feedback is incorporated into the transmitter design to provide an exact proportional relationship between the measured temperature and the transmitted signal.
Features:
Air Connections : 1/8" NPT Barbed Fitting for 5/32" or 1/4" OD Polytubing
Item : Pneumatic Temperature Transmitter
Element Type : Bulb
Depth : 2-1/8"
Height : 5-3/16"
Width : 3"
Air Consumption : 0.2 scfm
Capillary Length : 96"
Max. Air Pressure : 25 psi
Sensing Bulb Dia. : 1/4"
Sensing Bulb Length : 4"
Reverse Acting / Direct Acting : Direct Acting
Control Air Pressure : 3 to 15 psi
Temp. Control Range : 0 to 100 Degrees F
Output Pressure Range : 3 to 15 psi